|
Standalone OEM(Veridicom FPS200 sensor) - Smack Bio 2300
Introduction
Smack Bio 2300 is standalone OEM, it identifies one's fingerprint on the host's directives.
This product enables to control accuracy and read and write the fingerprint features data, carry 1:1 and 1:N matching on the host's directive with RS232 communication protocol.
It is rational to embedded system development for biometrics because it is OEM with the fingerprint sensor.
Features
·High matching speed and accuracy.
·support revolving fingerprint
·Possibility of setting accuracy on user's requirement.
Functions
·support Veridicom FPS200 sensor.
·1:1 1:N Matching
·Read/Write fingerprint image data.
·Management fingerprint database.
·Controlling identification accuracy.
·Reception and execution directives by RS232 communication.
Technical specification
|
Item |
Spec. |
|
Fingerprint sensor |
Veridicom FPS200 |
|
Fingerprint image size |
256 x 256 Pixels |
|
Image grasping area |
12.8 x 15.0(mm) |
|
Resolution |
403 dpi |
|
Fingerprint capacity
( FLASH 2Mbyte ) |
700 pri |
|
Range of ID |
1 ~ 32767 |
|
Matching mode |
1:N, 1:1 |
|
Range of threshold |
950 ~ |
|
Features data size |
1404 Bytes |
|
Connection type(I/F) |
RS232C(3 line)
Baud rate=9600~115200bps, Data Bit =8,
Parity=NONE,Stop Bit=1,Flow Control=NONE
|
|
False Accept Rate(FAR) |
< 0.0001 % (Threshold = 1050) |
|
False Rejection Rate(FRR) |
< 0.1 % (Threshold = 1050) |
|
Registration time |
< 3 sec |
|
Response time |
Input time |
< 100ms |
|
|
< 700ms |
|
|
< 300ms |
|
Total time |
< 1.1sec |
This product consists of fingerprint identification module, optical sensor, user's manual, sample program(with source code).
| 
